Sink installation skills, co-ordination, worry-free

To say which home does not have a sink installed, Xiao Bian said that he couldn't understand it. Is it true that he never starts to work, isn't it necessary to wash it? Is it true that there are people with sinks who have deep experience, sink leaks, or water leaks? Because of its convenient maintenance and easy installation, it has been neglected. However, grasping the basic installation tips can better eliminate the occurrence of subsequent events.

First, prepare to install the stainless steel sink

The installation of the stainless steel sink is usually installed after the countertop is installed. That is to say, the installation of the sink is done a few days before the completion of the renovation, mainly to avoid certain damage after installation.

1. First, open the package, remove the sink tank and drain components, and check if the accessories are correct and complete.

2. Take out the water tank and follow the opening template attached to the packing box to open the opening of the countertop. Check if the muffler block is degummed. If it is, please re-apply it.

3. Check whether the faucet is cracked or not, whether the sealing ring at both ends of the connecting pipe is missing, misplaced, damaged, etc., so as to avoid water leakage after installation.

Second, stainless steel sink installation precautions

1. The drain outlet of the sink must be left in the sink cabinet. Install the angle valve before installing the sink. In order to avoid damage to the outer surface of the faucet during the installation of the faucet, the faucet sleeve or faucet plastic bag should be placed on the faucet to install the faucet.

2. When connecting the hot and cold water pipes, face the faucet, the left end is connected with the hot water pipe, and the right end is connected with the cold water pipe.

3. When installing the bellows or braided tube, be sure to pay attention to the tightening force. If it is too large, it will easily damage the thread. If it is too small, it may leak due to the seal.

Third, after the installation is completed, do the water debugging of the stainless steel sink

Regarding the opening size of the stainless steel sink, the opening size of the stainless steel sink is generally 2 cm-2.5 cm in length and width of the outer diameter of the sink, and the angle R of the opening of the stainless steel sink is important. Finally, if the two slots are installed, it is recommended that you use the two sinks alternately to ensure that the sink is not blocked or leaking.

Cold Drawn Steel Square Bar is produced by cold drawing from hot rolled steel square bar. Our advantages and more services of Cold Drawn Steel Round Bar includes:

1) Wide range of sizes from 20mm*20mm to 100mm*100mm

2) Customized Length from 100mm to 12000mm

3) Good straightness: 2mm/m max

4) Precision size tolerance: -0.1mm/+0mm

5) Anti-rusty package

6) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

7) Fast delivery time

Cold Drawn Steel Square Bar

Square Steel Bar,Cold Drawn Square Bar,1018 Steel Square Bar,Cold Drawn Steel Square Bar